Height / Length: ft + in. → m
0.000 m
Uses 1 ft = 0.3048 m and 1 in = 25.4 mm.
Height / Length: m → ft + in.
0.00 ft / 0 ft 0.0 in
General purpose height or length conversion. Shows decimal feet first, then feet + inches.
Circumference: in. ↔ mm
0.0 in / 0 mm
Diameter from Circumference
0.0 in / 0 mm diameter
Diameter = circumference / pi. Handy when comparing US pole class data with metric pole measurements.
Quick Height / Length Presets
Pole Height / Length + Embedment
1/6th of pole length rule
Embedment 0.000 m / 0.00 ft, pole length 0.000 m / 0.00 ft
US rule: 10% of pole height + 2 ft
Embedment 0.000 m / 0.00 ft, pole length 0.000 m / 0.00 ft
Use this when the general height / length conversion also needs embedment, the portion of the pole underground.
Force Conversion
0.0 kN / 0 lbf
Useful for ANSI pole class ratings, tip load and failure load comparisons.
Stress Conversion
0.0 MPa / 0.0 kpsi
1 ksi = 6.89476 MPa. Common for timber fibre stress and modulus values.
Wind Pressure
0 Pa / 0.0 km/hr
Uses the AS/NZS 7000:2016 relationship q = 0.6 x (V/3.6)^2, where V is wind speed in km/hr.
Clear Values
Use the button below to clear all fields and start again.